Clot Activator with Blood Medical Clotting Reagent Blood Activator Powder

Product Description

[Product Name] Coagulant promoting Powder (High efficiency silicifier)

Packaging Specification :500g/ bottle

[Product properties] Class white powder, easy moisture absorption (dry powder).

[Main components] high polymer, coagulation factor, etc.
 

Appearance	White crystal powder
Place of Origin	Ezhou City, Hubei Province
Dissolution	Easily soluble in water
Storage	Sealing and moisture-proof
Main use	Promote blood coagulation

[Usage] Mix into water or alcohol suspension, spray on the inner wall of test tube, in

Dry at 40-50 ºC. Or add dry powder directly into the test tube with a spoon, generally

0.5~1mg This product can rapidly promote coagulation of 1ml blood sample.
Special Storage Conditions and methods : Sealed and moisture-proof

 

How to prepare the solvent for the coagulant powder.
To prepare a 1L solution of procoagulant powder we need to prepare the following reagents:
1, 60 grams of powdered coagulation-promoting powder;
2, 850 ml of alcohol;
3. 18 g of water-soluble silicone oil;
4. 150 ml of distilled water;
5. 18 g of polyethylene glycol 400.
Equipment required:
1. an electronic balance;
2. two measuring cylinders with a range of 100 ml;
3. two clean beakers;
4. A glass stirring bar.
 

Configuration steps:
1, the prepared 850ml of alcohol, poured into half to 60 grams of coagulation powder powder, stirring with a glass rod until completely dissolved (because the coagulation powder will be dissolved after a certain amount of precipitation, so this step will be added to the alcohol in two times, to avoid the residual coagulation powder in the latter vessels) to get reagent A set aside;
2, Add the weighed water-soluble silicone oil and polyethylene glycol 400 to distilled water and stir to make it fully integrated to obtain reagent B;
3, mix the prepared reagent A and reagent B into a beaker, stir and mix well, and wash the beaker with the remaining ethanol from step 1 to avoid the loss of the powder by precipitation at the bottom of the beaker, before pouring the alcohol into the mixed AB reagent;
4. Continue stirring with a stirring bar for 30 minutes to mix thoroughly to obtain 1L of successfully configured blood procoagulant powder solvent.
Desheng is a professional manufacturer of blood collection additives, in addition to procoagulants and serum separation gel, there are also anticoagulants and silicifying agents and other products, many customers also purchase several additives together, the same manufacturer's products with the use of better results. please feel free to contact us if you need it.